How to Replace a Hidden Bake Element in a GE Oven

How to Replace a Hidden Bake Element in a GE Oven

Your GE oven’s bake element is an important part of the oven’s heating system. It’s responsible for providing the heat that cooks your food. If the bake element goes out, your oven won’t be able to bake properly.

Replacing a hidden bake element in a GE oven isn’t difficult, but it does require some basic tools and skills. In this article, we’ll walk you through the process of replacing a hidden bake element in a GE oven. We’ll provide step-by-step instructions and images to help you along the way.

So, if your GE oven’s bake element is out, don’t despair. With a little time and effort, you can replace it yourself and get your oven back up and running in no time.

Step	Tools	Instructions
1	Phillips head screwdriver	Unplug the oven from the power outlet.
2	Torque wrench	Remove the two screws that secure the oven door to the oven body.
3	Needle nose pliers	Disconnect the wiring harness from the bake element.
4	1/4-inch socket wrench	Loosen the two nuts that secure the bake element to the oven body.
5	Oven mitts	Carefully remove the bake element from the oven.
6	New bake element	Install the new bake element in the oven.
7	Torque wrench	Tighten the two nuts that secure the bake element to the oven body.
8	Needle nose pliers	Reconnect the wiring harness to the bake element.
9	Phillips head screwdriver	Replace the two screws that secure the oven door to the oven body.
10	Pliers	Reattach the oven door to the oven body.

Tools and Materials Needed

To replace the hidden bake element in a GE oven, you will need the following tools and materials:

• A Phillips head screwdriver
• A flathead screwdriver
• A pair of pliers
• A wire brush
• A new bake element
• Safety glasses
• Electrical tape

Step-by-Step Instructions

1. Turn off the oven and unplug it from the wall.
2. Remove the oven door.
3. Locate the bake element. The bake element is located in the back of the oven, behind the oven door. It is a long, metal rod with a ceramic coating.
4. Unplug the bake element. There will be a connector on the back of the bake element. Use a Phillips head screwdriver to unscrew the connector.
5. Remove the bake element. Use a flathead screwdriver to pry the bake element out of the oven.
6. Clean the oven cavity. Use a wire brush to clean the oven cavity where the bake element was located.
7. Install the new bake element. Insert the new bake element into the oven cavity. Make sure that the connector is plugged into the back of the bake element.
8. Replace the oven door.
9. Plug the oven back in and turn it on.

Replacing the hidden bake element in a GE oven is a relatively simple task. By following these step-by-step instructions, you can have your oven back up and running in no time.

Here are some additional tips for replacing the hidden bake element in a GE oven:

• Be sure to wear safety glasses when working on your oven.
• Electrical tape can be used to protect the wires from the new bake element.
• If you are not comfortable working on your oven, you can always call a qualified appliance repair technician.

How To Replace Hidden Bake Element In GE Oven?

The hidden bake element in a GE oven is located at the back of the oven, behind the oven door. It is a long, thin element that runs across the back of the oven. To replace the hidden bake element, you will need to remove the oven door and the back panel of the oven.

1. Remove the oven door.

To remove the oven door, open the door all the way and locate the two hinge pins on the top of the door. These pins are located on either side of the door, just above the door handle.

Use a flathead screwdriver to pry the hinge pins out of the oven frame. Once the hinge pins are removed, you can lift the door off of the oven.

2. Remove the back panel.

The back panel of the oven is held in place by a series of screws. Locate these screws and remove them using a Phillips head screwdriver.

Once the screws are removed, you can carefully pry the back panel away from the oven. Be careful not to damage the wiring behind the panel.

3. Disconnect the electrical wires.

Once the back panel is removed, you will see the hidden bake element. The bake element is connected to the oven by two electrical wires.

Use a pair of pliers to disconnect the electrical wires from the bake element. Be careful not to damage the wires.

4. Remove the bake element.

The bake element is held in place by a series of clips. Use a flathead screwdriver to pry the clips loose and remove the bake element.

5. Install the new bake element.

To install the new bake element, simply reverse the steps above.

6. Test the oven.

Once the new bake element is installed, you can test the oven by turning it on and baking a cake.

Troubleshooting

If you are having trouble replacing the hidden bake element in your GE oven, here are a few troubleshooting tips:

• Make sure that you have the correct replacement part. The hidden bake element is a specific part for your model of oven. If you install the wrong part, it will not work properly.
• Be careful not to damage the electrical wires when you are disconnecting and reconnecting them. If you damage the wires, you could cause a fire.
• If you are still having trouble, you can contact a qualified appliance repair technician for help.

Additional Tips

Here are a few additional tips for replacing the hidden bake element in your GE oven:

• Wear gloves to protect your hands from the heat of the oven.
• Work in a well-ventilated area to avoid inhaling the dust from the old bake element.
• Keep all of the screws and clips organized so that you can easily put them back in place.
• Take pictures of the process as you go along so that you can refer to them if you need to.

  How do I remove the oven door to replace the bake element?

1. Turn off the oven and unplug it from the wall.
2. Open the oven door and locate the two screws on the top edge of the door.
3. Use a Phillips head screwdriver to remove the screws.
4. Carefully lift up the door and set it aside.
5. Locate the bake element on the back of the oven.
6. Use a pair of pliers to disconnect the wires from the bake element.
7. Remove the bake element from the oven.
8. Reverse the steps to install the new bake element.

What size bake element do I need?

The size of the bake element will vary depending on the model of your oven. You can find the correct size bake element by looking at the manufacturer’s specifications or by taking the old bake element to a hardware store.

How do I install the new bake element?

1. Align the new bake element with the mounting holes in the oven.
2. Connect the wires to the bake element.
3. Secure the bake element in place with the screws.
4. Close the oven door.
5. Plug the oven back into the wall and turn it on.

What if the bake element is still not working after I replace it?

There are a few possible reasons why the bake element may not be working after you replace it.

• The new bake element may be defective.
• The wires may not be connected properly.
• The oven may have a problem with the control panel.

If you have checked all of these things and the bake element is still not working, you may need to call a qualified technician to repair your oven.

In this blog post, we have discussed how to replace a hidden bake element in a GE oven. We have provided step-by-step instructions, as well as tips and tricks to help you complete the task safely and efficiently. We hope that this information has been helpful, and that you are now able to replace your hidden bake element with ease.