How To Start A Stihl Fs 70 R Weed Eater?

How to Start a Stihl FS 70 R Weed Eater

The Stihl FS 70 R weed eater is a powerful and versatile tool that can be used for a variety of tasks, from clearing brush to trimming hedges. However, before you can use it, you need to know how to start it. In this article, we will walk you through the process of starting a Stihl FS 70 R weed eater, step-by-step.

We’ll cover everything from preparing the machine to pulling the starter cord. By the end of this article, you’ll be able to start your Stihl FS 70 R weed eater with confidence. So let’s get started!

Step	Instructions	Image
1	Turn the choke to the “On” position.
2	Pull the starter rope slowly until you feel resistance, then pull it quickly.
3	Once the engine starts, release the choke and let it run for a few seconds.

Preparing the Weed Eater

Before you start your Stihl FS 70 R weed eater, it is important to make sure that it is properly prepared. This includes inspecting the weed eater for any damage, filling the fuel tank with the appropriate type of fuel, and checking the oil level and adding oil if necessary.

Inspect the Weed Eater for Any Damage

The first step is to inspect the weed eater for any damage. This includes checking the body of the weed eater for cracks or dents, the cutting head for damage to the blades or line, and the fuel tank for leaks. If you find any damage, do not use the weed eater until you have repaired it.

Fill the Fuel Tank with the Appropriate Type of Fuel

The next step is to fill the fuel tank with the appropriate type of fuel. The Stihl FS 70 R weed eater uses a mixture of gasoline and oil. The recommended fuel mixture is 50:1 gasoline to oil. You can purchase pre-mixed fuel from a hardware store or lawn and garden center, or you can mix your own fuel. If you are mixing your own fuel, use clean, fresh gasoline and oil.

To mix your own fuel, follow these steps:

1. Pour the gasoline into a clean container.
2. Add the oil to the gasoline.
3. Stir the mixture until it is well blended.
4. Pour the mixture into the fuel tank of the weed eater.

Check the Oil Level and Add Oil if Necessary

The final step is to check the oil level and add oil if necessary. The oil level should be between the “full” and “add” marks on the oil level gauge. If the oil level is low, add oil to the weed eater until the level is between the “full” and “add” marks.

By following these steps, you can ensure that your Stihl FS 70 R weed eater is properly prepared for use.

Starting the Weed Eater

Once the weed eater is properly prepared, you can start it by following these steps:

1. Turn the choke on. The choke is a lever located on the side of the weed eater. Turning the choke on will enrich the fuel mixture, which will make it easier to start the engine.
2. Pull the starter rope until the engine starts. The starter rope is located on the top of the weed eater. To start the engine, grasp the starter rope with both hands and pull it slowly until you feel resistance. Then, pull the rope quickly and firmly until the engine starts.
3. Allow the engine to warm up for a few seconds before using it. Once the engine starts, let it run for a few seconds before using it. This will allow the engine to warm up and reach its optimal operating temperature.

Troubleshooting

If the weed eater does not start, there are a few things you can check:

• Make sure that the fuel tank is full and that the fuel mixture is correct.
• Make sure that the oil level is correct.
• Make sure that the choke is turned on.
• Try pulling the starter rope more slowly or more quickly.
• If the weed eater still does not start, you may need to take it to a qualified service technician.

By following these steps, you can easily start your Stihl FS 70 R weed eater. If you have any trouble starting the weed eater, please consult the owner’s manual or a qualified service technician.

Additional Tips

• When using the weed eater, wear protective gear such as gloves, eye protection, and hearing protection.
• Be careful not to over-extend yourself when using the weed eater.
• Stop using the weed eater immediately if you experience any pain or discomfort.
• Keep the weed eater clean and well-maintained.
• Inspect the weed eater regularly for any damage.
• Replace worn or damaged parts as needed.

How to Start a Stihl FS 70 R Weed Eater

The Stihl FS 70 R weed eater is a powerful and versatile tool that can be used for a variety of tasks, from clearing brush to trimming hedges. However, before you can use it, you need to know how to start it.

Starting a Stihl FS 70 R weed eater is a relatively simple process, but there are a few steps you need to follow in order to do it correctly.

1. Check the fuel level. Make sure that the fuel tank is full of fresh gasoline.
2. Turn the choke on. The choke is a small lever located on the side of the carburetor. When the choke is on, it restricts the flow of air to the engine, which helps to start it.
3. Pull the starter rope. Grasp the starter rope with both hands and pull it slowly until you feel resistance. Then, pull the rope quickly and firmly until the engine starts.

Once the engine has started, you can release the choke. The engine will continue to run as long as you hold the throttle lever down.

Troubleshooting

If the Stihl FS 70 R weed eater does not start, there are a few things you can check:

• Make sure that the fuel tank is full and that the fuel is fresh.
• Make sure that the choke is on.
• Pull the starter rope slowly until you feel resistance. Then, pull the rope quickly and firmly until the engine starts.
• If the engine still does not start, you may need to have it serviced by a qualified technician.

Using the Weed Eater

Once the Stihl FS 70 R weed eater is started, you can use it to clear brush, trim hedges, and perform other tasks. Here are a few tips for using the weed eater safely and effectively:

• Hold the weed eater with both hands and keep the cutting head close to the ground.
• Move the weed eater back and forth in a sweeping motion.
• Avoid making contact with the ground or other objects.
• Wear safety glasses to protect your eyes from flying debris.
• If you are using the weed eater near people or animals, make sure they are a safe distance away.

Maintenance

To keep your Stihl FS 70 R weed eater in good working order, it is important to perform regular maintenance. Here are a few things you can do to maintain your weed eater:

• Clean the air filter regularly.
• Change the oil according to the manufacturer’s recommendations.
• Inspect the spark plug and replace it if necessary.
• Tune up the engine according to the manufacturer’s recommendations.

By following these tips, you can keep your Stihl FS 70 R weed eater running smoothly for many years to come.

Stopping the Weed Eater

To stop the Stihl FS 70 R weed eater, turn the choke off and pull the starter rope until the engine stops. Allow the engine to cool down before storing it.

The Stihl FS 70 R weed eater is a powerful and versatile tool that can be used for a variety of tasks. By following the steps in this guide, you can learn how to start, use, and maintain your weed eater safely and effectively.

How do I start a Stihl FS 70 R weed eater?

1. Make sure the trimmer is turned off and the spark plug wire is disconnected.
2. Check the fuel level. The fuel tank should be at least half full.
3. Prime the engine. To do this, press the primer bulb several times until fuel flows into the carburetor.
4. Attach the spark plug wire. Make sure the wire is securely connected to the spark plug.
5. Set the choke to the “On” position.
6. Pull the starter rope until the engine starts.
7. Once the engine is running, return the choke to the “Off” position.

What if the trimmer won’t start?

• Make sure the trimmer is turned on and the spark plug wire is connected.
• Check the fuel level. The fuel tank should be at least half full.
• Prime the engine. To do this, press the primer bulb several times until fuel flows into the carburetor.
• Check the spark plug. Make sure the spark plug is clean and in good condition.
• Clean the carburetor. If the carburetor is dirty, it can cause the trimmer to not start.
• Replace the spark plug. If the spark plug is bad, it can also cause the trimmer to not start.

How do I adjust the cutting head on my Stihl FS 70 R weed eater?

1. Turn off the trimmer and disconnect the spark plug wire.
2. Loosen the two screws that hold the cutting head in place.
3. Adjust the cutting head so that the cutting blades are parallel to the ground.
4. Retighten the two screws.
5. Reconnect the spark plug wire.

How do I change the string on my Stihl FS 70 R weed eater?

1. Turn off the trimmer and disconnect the spark plug wire.
2. Remove the old string. To do this, loosen the two screws that hold the string in place and pull the string out of the cutting head.
3. Thread the new string through the cutting head. Make sure the string is long enough to reach the bottom of the cutting head.
4. Tighten the two screws.
5. Reconnect the spark plug wire.

How do I maintain my Stihl FS 70 R weed eater?

• Regularly clean the air filter. A dirty air filter can cause the trimmer to run poorly and lose power.
• Replace the spark plug every 50 hours of use. A bad spark plug can cause the trimmer to not start or run poorly.
• Clean the carburetor every 100 hours of use. A dirty carburetor can also cause the trimmer to not start or run poorly.
• Sharpen the cutting blades regularly. Dull cutting blades can make the trimmer difficult to use and can damage the plants you are trimming.

  starting a Stihl FS 70 R weed eater is a simple process that can be completed in a few steps. By following the steps outlined in this guide, you can be sure that your weed eater will be up and running in no time.

Here are the key takeaways from this guide:

• Make sure that the weed eater is turned off and the spark plug wire is disconnected before beginning.
• Check the fuel level and add fuel if necessary.
• Pull the starter rope slowly until you feel resistance, then pull it rapidly until the engine starts.
• Allow the engine to warm up for a few minutes before using it.

By following these steps, you can safely and easily start your Stihl FS 70 R weed eater.