How To Start A Stihl Fs38 Weed Eater?

Stihl FS38 Weed Eater: How to Start

The Stihl FS38 weed eater is a powerful and versatile tool that can be used for a variety of tasks, from clearing brush to trimming hedges. However, before you can use it, you need to know how to start it.

Starting a Stihl FS38 weed eater is relatively simple, but there are a few things you need to do in order to do it correctly. In this article, we will walk you through the process of starting a Stihl FS38 weed eater, step-by-step.

We will also provide some tips on how to maintain your weed eater and keep it running smoothly. So, whether you’re a new owner or you’re just looking for a refresher, read on for all the information you need to know about starting a Stihl FS38 weed eater.

Step	Instructions	Image
1	Remove the spark plug boot.
2	Turn the choke to the “On” position.
3	Pull the starter rope slowly until you feel resistance.
4	Continue to pull the starter rope until the engine starts.
5	Once the engine starts, return the choke to the “Off” position.

How to Start a Stihl FS38 Weed Eater?

This guide will show you how to start a Stihl FS38 weed eater. The FS38 is a popular model of weed eater that is known for its power and durability. It is a great choice for homeowners who need a weed eater that can handle tough jobs.

To start the FS38, you will need to:

1. Gather the necessary tools and materials.
2. Make sure the weed eater is in good working order.
3. Check the fuel level and oil level.
4. Turn the choke on.
5. Pull the starter rope slowly until you feel resistance.
6. Pull the starter rope quickly until the engine starts.

1. Gather the necessary tools and materials.

To start the FS38, you will need the following tools and materials:

• A fuel can
• A funnel
• A spark plug wrench
• A rag
• Gasoline
• Oil

2. Make sure the weed eater is in good working order.

Before you start the FS38, you should check to make sure that it is in good working order. This means checking the following:

• The spark plug is clean and in good condition.
• The air filter is clean and in good condition.
• The fuel tank is full of fresh gasoline.
• The oil level is correct.

3. Check the fuel level and oil level.

The fuel tank should be full of fresh gasoline. The oil level should be between the “full” and “add” marks on the oil level indicator.

4. Turn the choke on.

The choke is a lever located on the side of the carburetor. It is used to enrich the fuel mixture and make it easier to start the engine.

To turn the choke on, simply move the lever to the “choke” position.

5. Pull the starter rope slowly until you feel resistance.

Once the choke is on, you can start the engine by pulling the starter rope.

To do this, grasp the starter rope with both hands and pull it slowly until you feel resistance.

6. Pull the starter rope quickly until the engine starts.

Once you feel resistance, pull the starter rope quickly until the engine starts.

The engine should start within a few pulls. If it does not start, try turning the choke off and then on again. If the engine still does not start, you may need to have it serviced.

Troubleshooting

If you are having trouble starting the FS38, there are a few things you can check:

• Make sure that the choke is in the correct position.
• Make sure that the fuel tank is full of fresh gasoline.
• Make sure that the oil level is correct.
• Check the spark plug for damage.
• Clean the air filter.

If you have checked all of these things and the engine still does not start, you may need to have it serviced.

Starting a Stihl FS38 weed eater is a simple process. By following the steps in this guide, you can have your weed eater up and running in no time.

Adjusting the Choke

The choke is a mechanism that restricts the flow of air to the carburetor, which helps to start a cold engine. Once the engine is running, the choke should be turned off to allow for proper fuel and air mixture.

To adjust the choke on a Stihl FS38 weed eater, follow these steps:

1. Locate the choke knob on the side of the carburetor.
2. Turn the choke knob clockwise to close it.
3. Start the engine.
4. Once the engine is running, turn the choke knob counterclockwise to open it.

Note: The choke should only be used to start a cold engine. Once the engine is warm, the choke should be turned off.

Allowing the Engine to Warm Up

After starting the engine, it is important to allow it to warm up for a few minutes before using it. This will help to prevent damage to the engine.

To allow the engine to warm up, follow these steps:

1. Start the engine.
2. Allow the engine to run for a few minutes at idle.
3. Once the engine is warm, you can begin using it.

Note: Do not run the engine at full throttle until it has warmed up completely.

Troubleshooting

If the engine fails to start, there may be a problem with the spark plug, fuel, or air filter.

Spark plug

The spark plug is responsible for igniting the fuel in the engine. If the spark plug is dirty or fouled, it may not be able to properly ignite the fuel, which will prevent the engine from starting.

To check the spark plug, follow these steps:

1. Remove the spark plug from the engine.
2. Clean the spark plug with a wire brush.
3. Check the spark plug gap with a feeler gauge. The spark plug gap should be between 0.020 and 0.030 inches.
4. If the spark plug is dirty or fouled, replace it with a new one.

Fuel

The fuel system is responsible for delivering fuel to the carburetor. If there is not enough fuel in the carburetor, the engine will not start. If there is too much fuel in the carburetor, the engine will flood and will not start.

To check the fuel system, follow these steps:

1. Make sure that the fuel tank is full.
2. Check the fuel filter for debris.
3. Clean the fuel filter if necessary.

Air filter

The air filter is responsible for filtering air from the atmosphere and preventing dirt and debris from entering the engine. If the air filter is dirty, it will restrict the flow of air to the carburetor, which will prevent the engine from starting.

To check the air filter, follow these steps:

1. Remove the air filter from the engine.
2. Clean the air filter with a clean cloth.
3. If the air filter is torn or damaged, replace it with a new one.

These are the steps on how to start a Stihl FS38 weed eater. If you have any further questions, please consult the owner’s manual for your specific model of weed eater.

How do I start a Stihl FS38 weed eater?

1. Make sure the machine is turned off and the spark plug wire is disconnected.
2. Check the fuel level. The fuel tank should be at least half full.
3. Prime the engine. To do this, press the primer bulb several times until fuel flows into the carburetor.
4. Attach the spark plug wire. Make sure the wire is securely connected to the spark plug.
5. Turn the choke on. The choke is a lever located on the side of the carburetor.
6. Pull the starter rope slowly until you feel resistance. Then, pull the rope quickly and firmly. The engine should start.
7. Adjust the choke as needed. Once the engine is running, you can turn the choke off.

What should I do if the weed eater won’t start?

1. Check the spark plug. Make sure the spark plug is clean and properly gapped.
2. Check the fuel. Make sure the fuel is fresh and clean.
3. Check the air filter. The air filter may be clogged, which can prevent the engine from getting enough air.
4. Check the carburetor. The carburetor may be dirty or out of adjustment.
5. Take the weed eater to a qualified service technician. If you have tried all of the above and the weed eater still won’t start, it may need to be serviced by a qualified technician.

What are some tips for using a Stihl FS38 weed eater?

1. Wear proper safety gear, including eye protection, gloves, and long pants.
2. Start the weed eater on a flat surface.
3. Hold the weed eater with both hands and keep your feet shoulder-width apart.
4. Use a sweeping motion to cut the weeds.
5. Do not over-extend yourself. Take frequent breaks and avoid working in hot weather.
6. Maintain your weed eater regularly. This includes changing the oil, cleaning the air filter, and sharpening the blade.

Where can I get replacement parts for my Stihl FS38 weed eater?

You can get replacement parts for your Stihl FS38 weed eater from a Stihl dealer or online retailer. You can also find replacement parts on the Stihl website.

starting a Stihl FS38 weed eater is a simple process that can be completed in a few steps. By following the steps outlined in this guide, you can be sure that your weed eater will be up and running in no time.

Here are the key takeaways from this guide:

• To start the weed eater, first make sure that the choke is in the closed position.
• Next, turn the fuel valve to the on position.
• Pull the starter rope until the engine starts.
• Once the engine is running, open the choke to the half-open position.
• Allow the engine to warm up for a few minutes before using it.

By following these steps, you can safely and easily start your Stihl FS38 weed eater.