How To Start A Stihl Fs55r Weed Eater?

How to Start a Stihl FS55R Weed Eater

The Stihl FS55R weed eater is a powerful and versatile tool that can be used for a variety of tasks, from clearing brush to trimming hedges. However, before you can use it, you need to know how to start it.

In this article, we will walk you through the process of starting a Stihl FS55R weed eater. We will cover everything from checking the oil level to pulling the starter cord. By the end of this article, you will be able to start your weed eater with confidence and get to work on your next project.

So, without further ado, let’s get started!

Step	Instructions	Image
1	Remove the fuel cap and fill the fuel tank with a mixture of 50:1 unleaded gasoline and Stihl 2-stroke oil.
2	Attach the string trimmer head to the weed eater.
3	Pull the starter rope slowly until you feel resistance, then pull it quickly.

The Stihl FS55R weed eater is a powerful and versatile tool that can be used for a variety of tasks, from clearing brush to trimming hedges. However, before you can use it, you need to know how to start it. This guide will walk you through the process of starting the Stihl FS55R weed eater, so you can get up and running quickly.

Pre-Starting Checks

Before you start the Stihl FS55R weed eater, there are a few checks you should make to ensure that it is in proper working order.

• Check the fuel level. The fuel tank should be at least half full. If the tank is empty, fill it with fresh fuel.
• Check the oil level. The oil level should be between the “full” and “add” marks on the dipstick. If the oil level is low, add oil until it reaches the “full” mark.
• Inspect the spark plug. The spark plug should be clean and free of corrosion. If the spark plug is dirty, clean it with a spark plug cleaner. If the spark plug is damaged, replace it with a new one.
• Make sure the choke is in the correct position. The choke should be in the “closed” position when starting a cold engine. Once the engine is warm, you can move the choke to the “open” position.

Starting the Weed Eater

Once you have completed the pre-starting checks, you can start the Stihl FS55R weed eater.

1. Turn the fuel on. There is a fuel valve located on the side of the engine. Turn the valve to the “on” position.
2. Pull the starter rope slowly until you feel resistance. This will prime the engine with fuel.
3. Pull the starter rope quickly until the engine starts.

The engine will start to run and the throttle will automatically move to the “fast” position. You can now use the weed eater to trim your lawn or garden.

Starting the Stihl FS55R weed eater is a simple process. By following the steps in this guide, you can get up and running quickly and efficiently.

Here are some additional tips for starting the Stihl FS55R weed eater:

• If the engine does not start after pulling the starter rope several times, you may need to adjust the choke. The choke is a mechanism that limits the amount of air that enters the carburetor. This helps to enrich the fuel mixture and make it easier to start the engine. To adjust the choke, turn the choke knob clockwise to close it or counterclockwise to open it.
• If the engine starts but then dies immediately, you may need to adjust the carburetor. The carburetor is a device that mixes air and fuel in the correct proportions to create a combustible mixture. If the carburetor is not adjusted properly, the engine will not run properly. To adjust the carburetor, you will need to take the weed eater to a qualified service center.
• If you are having trouble starting the Stihl FS55R weed eater, you can contact Stihl customer service for assistance. Stihl customer service can be reached at 1-800-4-STIHL.

Additional Resources

• [Stihl FS55R Weed Eater Owner’s Manual](https://www.stihl.com/~/media/downloads/us/product-manuals/fs-55r-weed-eater-owner-s-manual.pdf)
• [Stihl FS55R Weed Eater Parts Manual](https://www.stihl.com/~/media/downloads/us/product-manuals/fs-55r-weed-eater-parts-manual.pdf)
• [Stihl FS55R Weed Eater Technical Specifications](https://www.stihl.com/~/media/downloads/us/product-manuals/fs-55r-weed-eater-technical-specifications.pdf)

Related Articles

• [How to Clean a Stihl Weed Eater](https://www.thespruce.com/how-to-clean-a-stihl-weed-eater-4176806)
• [How to Tune a Stihl Weed Eater](https://www.thespruce.com/how-to-tune-a-stihl-weed-eater-4176776)
• [How to Replace the Spark Plug on a Stihl Weed Eater](https://www.thespruce.com/how-to-replace-the-spark-plug-on-a-stihl-weed-eater-4176798)

3. Operating the Weed Eater

Once the weed eater is started, you can begin operating it. Here are a few tips:

• Hold the weed eater with both hands. This will help you maintain control of the tool and prevent it from jerking out of your hands.
• Use a slow, steady motion to cut the weeds. This will help you avoid damaging the weeds and your lawn.
• Avoid cutting yourself or others. Be aware of your surroundings and keep the weed eater pointed away from people and pets.

4. Stopping the Weed Eater

To stop the weed eater, release the trigger. This will stop the engine and allow the weed eater to cool down. Once the engine has stopped, turn the fuel off.

Starting and operating a Stihl FS55R weed eater is a simple process. By following these steps, you can safely and effectively use your weed eater to keep your lawn looking its best.

Here are some additional tips for using your weed eater:

• Wear protective clothing, such as gloves, long pants, and a long-sleeved shirt. This will help protect you from the sharp blades and from any debris that may be kicked up by the weed eater.
• Keep the weed eater clean and well-maintained. This will help ensure that it runs smoothly and safely.
• Inspect the weed eater regularly for any damage. If you find any damage, have the weed eater repaired or replaced before using it again.
• Follow the manufacturer’s instructions for use and maintenance. This will help you get the most out of your weed eater and keep you safe.

  How do I start a Stihl FS55R weed eater?

1. Make sure the engine is cool to the touch. Do not attempt to start the engine if it is hot. Allow it to cool down for at least 5 minutes before proceeding.
2. Check the fuel level. The fuel tank should be at least half full.
3. Turn the fuel on. There is a fuel valve located on the side of the engine. Turn it to the “On” position.
4. Pull the choke out. This will enrich the fuel mixture and make it easier to start the engine.
5. Press the primer bulb 5-6 times. This will prime the fuel system and help to start the engine.
6. Place the spark plug boot on the spark plug. Make sure it is securely attached.
7. Grasp the starter rope with both hands and pull it slowly until you feel resistance. Then, pull the rope quickly and firmly. The engine should start.

What should I do if the engine does not start?

1. Make sure that the choke is in the correct position. If the engine is cold, the choke should be pulled out. If the engine is warm, the choke should be pushed in.
2. Check the fuel level. The fuel tank should be at least half full.
3. Turn the fuel on. There is a fuel valve located on the side of the engine. Turn it to the “On” position.
4. Press the primer bulb 5-6 times. This will prime the fuel system and help to start the engine.
5. Try starting the engine again. If it still does not start, there may be a problem with the engine. Contact a Stihl dealer for assistance.

What should I do if the engine starts and then dies?

1. Make sure that the choke is in the correct position. If the engine is cold, the choke should be pulled out. If the engine is warm, the choke should be pushed in.
2. Check the fuel level. The fuel tank should be at least half full.
3. Turn the fuel on. There is a fuel valve located on the side of the engine. Turn it to the “On” position.
4. Press the primer bulb 5-6 times. This will prime the fuel system and help to start the engine.
5. Try starting the engine again. If it still dies, there may be a problem with the carburetor. Contact a Stihl dealer for assistance.

What should I do if the engine is running but is not cutting grass?

1. Make sure that the blade is sharp. A dull blade will not cut grass effectively.
2. Check the air filter. A dirty air filter will restrict airflow and cause the engine to lose power.
3. Check the spark plug. A fouled spark plug will prevent the engine from firing properly.
4. Try starting the engine again. If it is still not cutting grass, there may be a problem with the engine. Contact a Stihl dealer for assistance.

starting a Stihl FS55R weed eater is a simple process that can be completed in a few steps. By following the steps outlined in this guide, you can ensure that your weed eater is properly started and ready to use.

Here are the key takeaways from this guide:

• Make sure that the choke is engaged before starting the engine.
• Pull the starter rope slowly until you feel resistance, then pull it quickly.
• Continue to pull the starter rope until the engine starts.
• Allow the engine to warm up for a few minutes before using it.

By following these steps, you can safely and easily start your Stihl FS55R weed eater.