How To Start Stihl Fs 38 Weed Eater?

How to Start a Stihl FS 38 Weed Eater

The Stihl FS 38 weed eater is a powerful and versatile tool that can be used for a variety of tasks, from clearing brush to trimming hedges. However, before you can use it, you need to know how to start it.

Starting a Stihl FS 38 weed eater is a relatively simple process, but there are a few things you need to know in order to do it correctly. In this article, we will walk you through the steps of starting a Stihl FS 38 weed eater, so that you can get up and running quickly and easily.

We’ll also provide some tips on how to use your weed eater safely and effectively. So, whether you’re a first-time user or you’re just looking for a refresher, read on for all the information you need to know about starting a Stihl FS 38 weed eater.

Step	Instructions	Image
1	Make sure the choke is in the “On” position.
2	Pull the starter rope slowly until you feel resistance.
3	Continue pulling the starter rope until the engine starts.

How to Start a Stihl FS 38 Weed Eater

The Stihl FS 38 is a powerful and versatile weed eater that can be used for a variety of tasks around the yard. It’s important to know how to start the weed eater properly in order to get the best results.

This guide will walk you through the steps of starting a Stihl FS 38 weed eater.

Preparation

Before you start the weed eater, there are a few things you need to check to make sure it’s in good working order.

1. Check the oil level. The oil level should be between the “full” and “add” marks on the dipstick. If the oil level is low, add oil to the crankcase until it reaches the “full” mark.
2. Check the fuel level. The fuel tank should be at least half full. If the fuel tank is empty, fill it with fresh gasoline.
3. Inspect the spark plug. The spark plug should be clean and free of corrosion. If the spark plug is dirty, clean it with a spark plug cleaner. If the spark plug is damaged, replace it with a new one.

Starting the Engine

Once you’ve checked the oil and fuel levels and inspected the spark plug, you can start the engine.

1. Turn the choke on. The choke is a lever located on the side of the carburetor. When the choke is on, it enriches the fuel mixture, which makes it easier to start the engine.
2. Pull the starter rope slowly until you feel resistance. This will prime the engine with fuel.
3. Pull the starter rope quickly. This will start the engine.

The engine may take a few tries to start. If the engine doesn’t start after several tries, check the spark plug and make sure it’s properly installed. You may also need to clean the carburetor.

Troubleshooting

If you’re having trouble starting your Stihl FS 38 weed eater, here are a few things you can check:

• Check the oil level. If the oil level is low, the engine may not be able to start.
• Check the fuel level. If the fuel tank is empty, the engine will not start.
• Inspect the spark plug. The spark plug may be dirty or damaged. If the spark plug is dirty, clean it with a spark plug cleaner. If the spark plug is damaged, replace it with a new one.
• Check the carburetor. The carburetor may be dirty or clogged. If the carburetor is dirty, clean it with a carburetor cleaner. If the carburetor is clogged, you may need to have it serviced.

Starting a Stihl FS 38 weed eater is a simple process. By following these steps, you can get your weed eater up and running in no time.

Here are some additional tips for starting your Stihl FS 38 weed eater:

• Start the engine in a well-ventilated area. The engine emits exhaust fumes, so it’s important to start the engine in a well-ventilated area.
• Hold the weed eater firmly with both hands. The weed eater is a powerful tool, so it’s important to hold it firmly with both hands when you’re starting it.
• Be careful not to pull the starter rope too quickly. Pulling the starter rope too quickly can damage the engine.
• Don’t start the engine if the air filter is dirty. A dirty air filter can cause the engine to run poorly or not start at all.

By following these tips, you can safely and easily start your Stihl FS 38 weed eater.

How to Start Stihl FS 38 Weed Eater

The Stihl FS 38 weed eater is a powerful and versatile tool that can be used for a variety of tasks, from clearing brush to trimming hedges. However, before you can use it, you need to know how to start it.

This guide will walk you through the process of starting your Stihl FS 38 weed eater. We’ll cover everything from checking the oil level to pulling the starter rope. By the end of this guide, you’ll be able to start your weed eater with ease.

1. Checking the Oil Level

Before you start your weed eater, you need to check the oil level. To do this, follow these steps:

1. Remove the oil cap.
2. Use the dipstick to check the oil level. The oil level should be between the “full” and “add” marks on the dipstick.
3. If the oil level is low, add oil until it reaches the “full” mark.

2. Priming the Carburetor

Once you’ve checked the oil level, you need to prime the carburetor. To do this, follow these steps:

1. Turn the choke on.
2. Pull the starter rope until you see fuel coming out of the carburetor.
3. Turn the choke off.

3. Starting the Engine

Now that you’ve checked the oil level and primed the carburetor, you’re ready to start the engine. To do this, follow these steps:

1. Hold the weed eater with the handle in one hand and the starter rope in the other hand.
2. Stand with your feet shoulder-width apart and your body slightly bent over.
3. Pull the starter rope slowly until you feel resistance.
4. Pull the starter rope quickly until the engine starts.

Once the engine starts, you can release the choke. The engine should idle smoothly.

4. Running the Engine

Once the engine is running, you need to allow it to warm up for a few minutes. To do this, let the engine run at idle for 2-3 minutes. This will allow the oil to circulate and the engine to reach its proper operating temperature.

While the engine is warming up, you can adjust the throttle. The throttle controls the speed of the engine. To increase the speed of the engine, turn the throttle clockwise. To decrease the speed of the engine, turn the throttle counterclockwise.

Once the engine is warmed up, you can use the weed eater. To do this, hold the weed eater with both hands and grasp the handle with your dominant hand. The throttle should be in your non-dominant hand.

To start using the weed eater, pull the starter rope to engage the blade. The blade will start spinning and you can begin trimming.

5. Stopping the Engine

To stop the engine, release the throttle and turn the choke on. Then, pull the starter rope until the engine stops.

Once the engine is stopped, you can remove the spark plug boot and store the weed eater in a safe place.

Starting your Stihl FS 38 weed eater is a simple process. By following these steps, you can have your weed eater up and running in no time.

How do I start my Stihl FS 38 weed eater?

1. Make sure the trimmer is off and the spark plug wire is disconnected.
2. Check the fuel level. The fuel tank should be at least half full.
3. Prime the engine. To do this, press the primer bulb several times until fuel flows into the carburetor.
4. Attach the spark plug wire. Make sure the wire is securely connected to the spark plug.
5. Turn the trimmer on. To do this, slide the choke lever to the “On” position and pull the starter rope until the engine starts.
6. Adjust the choke lever. Once the engine is running, move the choke lever to the “Off” position.

What should I do if my Stihl FS 38 weed eater won’t start?

1. Check the spark plug. Make sure the spark plug is clean and has a good spark.
2. Check the fuel filter. The fuel filter may be clogged, preventing fuel from reaching the carburetor.
3. Check the carburetor. The carburetor may be dirty or out of adjustment.
4. Check the air filter. The air filter may be dirty, preventing air from reaching the carburetor.
5. Take your trimmer to a Stihl dealer for service. If you have tried all of the above and your trimmer still won’t start, it may need to be serviced by a qualified technician.

How do I change the oil in my Stihl FS 38 weed eater?

1. Turn off the trimmer and let it cool down.
2. Remove the oil cap.
3. Use a funnel to pour new oil into the oil tank. The oil tank capacity is 200 ml (6.8 oz).
4. Replace the oil cap.
5. Start the trimmer and let it run for a few minutes to circulate the new oil.

How do I sharpen the blades on my Stihl FS 38 weed eater?

1. Turn off the trimmer and let it cool down.
2. Remove the trimmer head.
3. Use a file to sharpen the blades. Make sure to sharpen both sides of the blades evenly.
4. Reattach the trimmer head.

How do I maintain my Stihl FS 38 weed eater?

1. Regularly clean the air filter. A dirty air filter can cause the engine to run poorly and may even damage it.
2. Replace the spark plug annually. A worn spark plug can cause the engine to misfire and may even fail to start.
3. Change the oil every 50 hours of use. Old oil can become contaminated with dirt and debris, which can damage the engine.
4. Inspect the trimmer for any damage. Look for cracks in the housing, loose screws or bolts, and other signs of wear and tear.
5. Take your trimmer to a Stihl dealer for a tune-up every year. A qualified technician can inspect your trimmer for any problems and make sure it is running properly.

starting a Stihl FS 38 weed eater is a simple process that can be completed in a few steps. By following the steps outlined in this guide, you can be sure that your weed eater will be up and running in no time.

Here are the key takeaways from this guide:

• Make sure that the weed eater is turned off and the spark plug wire is disconnected before beginning.
• Fill the fuel tank with fresh gasoline.
• Prime the engine by pumping the primer bulb several times.
• Pull the starter rope until the engine starts.
• Reconnect the spark plug wire and adjust the choke to the run position.

By following these steps, you can safely and easily start your Stihl FS 38 weed eater.