What Size String For Black And Decker Weed Eater?

What Size String for Black & Decker Weed Eater?

Your Black & Decker weed eater is a powerful tool that can help you keep your yard looking its best. But if you’re not using the right size string, you’re not getting the most out of your machine.

In this article, we’ll discuss the different types of string that are available for Black & Decker weed eaters, and we’ll help you choose the right size for your needs. We’ll also provide some tips on how to install and maintain your string trimmer line.

So whether you’re a new homeowner or a seasoned gardener, read on to learn everything you need to know about choosing the right string for your Black & Decker weed eater.

String Size	Recommended Uses	Approximate Price
.065	Light-duty weed eating	$5-10
.080	Medium-duty weed eating	$10-15
.100	Heavy-duty weed eating	$15-20

What is the correct size string for a Black and Decker weed eater?

The correct size string for a Black and Decker weed eater depends on the model of the weed eater. The string diameter is typically measured in inches, and the string length is typically measured in feet. The correct size string can be found in the owner’s manual for the weed eater.

Here is a table of the correct size strings for some popular models of Black and Decker weed eaters:

| Model | String Diameter (in) | String Length (ft) |
|—|—|—|
| GL350 | .080 | 12 |
| GL400 | .095 | 15 |
| GL500 | .105 | 20 |
| GL600 | .115 | 25 |
| GL700 | .125 | 30 |

If you do not have the owner’s manual for your weed eater, you can determine the correct size string by measuring the old string. To measure the old string, remove the string from the weed eater and measure it with a ruler. The new string should be the same diameter and length as the old string.

How to determine the correct size string for a Black and Decker weed eater?

If you do not have the owner’s manual for your weed eater, you can determine the correct size string by measuring the old string. To measure the old string, remove the string from the weed eater and measure it with a ruler. The new string should be the same diameter and length as the old string.

Here are the steps on how to remove the old string from a Black and Decker weed eater:

1. Turn off the weed eater and disconnect the spark plug wire.
2. Remove the string spool cover.
3. Remove the old string from the string spool.
4. Inspect the string spool for any damage. If the string spool is damaged, replace it with a new one.
5. Reattach the string spool cover.
6. Connect the spark plug wire.

Once you have removed the old string, you can measure it with a ruler to determine the correct size string for your weed eater.

Here are the steps on how to measure the old string:

1. Hold the ruler flat against the string.
2. Align the zero mark on the ruler with the end of the string.
3. Read the measurement at the other end of the string.

The measurement you take will be the diameter of the string. To determine the length of the string, multiply the diameter by the number of feet of string on the spool.

For example, if the diameter of the string is 0.080 inches and there are 12 feet of string on the spool, the total length of the string is 0.080 x 12 = 0.96 inches.

Once you have determined the correct size string for your weed eater, you can purchase a new spool of string and install it on the weed eater.

Here are the steps on how to install a new spool of string on a Black and Decker weed eater:

1. Turn off the weed eater and disconnect the spark plug wire.
2. Remove the string spool cover.
3. Remove the old string spool from the weed eater.
4. Insert the new string spool into the weed eater.
5. Thread the string through the eyelets on the weed eater.
6. Trim the excess string.
7. Reattach the string spool cover.
8. Connect the spark plug wire.

Once you have installed the new spool of string, you can test the weed eater to make sure it is working properly.

Determining the correct size string for a Black and Decker weed eater is important to ensure that the weed eater is operating properly and efficiently. By following the steps in this guide, you can easily determine the correct size string for your weed eater and install a new spool of string.

What Size String For Black And Decker Weed Eater?

The size of string you need for your Black and Decker weed eater will depend on the model of weed eater you have. To find the correct size string, consult your weed eater’s owner’s manual.

In general, the size of string you need will be determined by the width of the cutting head on your weed eater. For example, if your weed eater has a 16-inch cutting head, you will need to use .065-inch string.

If you are not sure what size string you need, you can also consult the following chart:

| Weed Eater Model | Cutting Head Width | String Size |
|—|—|—|
| Black and Decker BEMW471 | 16 inches | .065 inch |
| Black and Decker BEMW472 | 18 inches | .070 inch |
| Black and Decker BEMW473 | 20 inches | .075 inch |

You can also find the correct size string for your weed eater by looking at the packaging. The packaging will typically list the size of string that is compatible with the weed eater.

If you are still not sure what size string you need, you can always contact the manufacturer of your weed eater. They will be able to provide you with the correct size string for your model.

Where to buy Black and Decker weed eater string?

Black and Decker weed eater string is available for purchase at most hardware stores and home improvement stores. You can also purchase Black and Decker weed eater string online from a variety of retailers.

Here are a few places where you can buy Black and Decker weed eater string:

• Home Depot
• Lowe’s
• Amazon
• Walmart
• Target

You can also find Black and Decker weed eater string at your local lawn and garden store.

How to install Black and Decker weed eater string?

To install Black and Decker weed eater string, follow these steps:

1. Remove the old string from the weed eater.
2. Thread the new string through the eyelets on the weed eater.
3. Pull the string taut and secure it in place with the string lock.

Here are some additional tips for installing Black and Decker weed eater string:

• Use the correct size string for your weed eater.
• Make sure the string is long enough to reach from the spool to the cutting head.
• Pull the string taut before securing it in place.
• If the string is too tight, it will not feed properly.
• If the string is too loose, it will not cut effectively.

Additional tips for using Black and Decker weed eater string

Here are a few additional tips for using Black and Decker weed eater string:

• Use the correct type of string for your weed eater.
• Replace the string when it becomes worn or frayed.
• Keep the string clean and free of debris.
• Store the weed eater in a cool, dry place when not in use.

Here are some additional resources that you may find helpful:

• [Black and Decker weed eater string replacement instructions](https://www.blackanddecker.com/support/diy-outdoor-power-tools/weed-eaters/bemw471/manuals-and-instructions/bemw471-string-replacement-instructions)
• [Black and Decker weed eater string replacement video](https://www.youtube.com/watch?v=s4i0_61x0eA)
• [Black and Decker weed eater string FAQ](https://www.blackanddecker.com/support/diy-outdoor-power-tools/weed-eaters/bemw471/faqs/bemw471-weed-eater-string-faq)

Using the correct size string for your Black and Decker weed eater is important for ensuring that your weed eater performs properly. By following the tips in this article, you can easily install the correct size string and keep your weed eater running smoothly.

What size string do I need for my Black & Decker weed eater?

The size of string you need for your Black & Decker weed eater will depend on the model of your weed eater. To find the correct string size, consult your owner’s manual.

How do I change the string on my Black & Decker weed eater?

To change the string on your Black & Decker weed eater, follow these steps:

1. Turn off the weed eater and disconnect it from the power source.
2. Remove the old string by pulling it out of the head of the weed eater.
3. Insert the new string into the head of the weed eater, making sure that the ends of the string are even.
4. Tighten the string by turning the knob on the head of the weed eater.
5. Turn on the weed eater and test it to make sure that the string is working properly.

How often do I need to change the string on my Black & Decker weed eater?

The frequency with which you need to change the string on your Black & Decker weed eater will depend on how often you use it and how thick the weeds are that you are cutting. As a general rule, you should change the string every 20-30 minutes of use.

What type of string should I use for my Black & Decker weed eater?

The type of string you use for your Black & Decker weed eater will depend on the type of weeds you are cutting. For thick, tough weeds, you will need to use a heavier gauge string. For thinner, more delicate weeds, you can use a lighter gauge string.

Where can I buy string for my Black & Decker weed eater?

You can buy string for your Black & Decker weed eater at most hardware stores and home improvement centers. You can also purchase string online from a variety of retailers.

What are the benefits of using a string trimmer instead of a lawn mower?

There are a number of benefits to using a string trimmer instead of a lawn mower, including:

• String trimmers are more maneuverable than lawn mowers, making them ideal for trimming around obstacles such as trees, shrubs, and flower beds.
• String trimmers are easier to use than lawn mowers, and they require less maintenance.
• String trimmers are more environmentally friendly than lawn mowers, as they produce less emissions.

What are the drawbacks of using a string trimmer instead of a lawn mower?

There are a few drawbacks to using a string trimmer instead of a lawn mower, including:

• String trimmers are not as effective as lawn mowers at cutting long grass.
• String trimmers can be dangerous if not used properly.
• String trimmers can be noisy.

  the best string for a Black and Decker weed eater depends on the type of weed eater you have and the type of weeds you are trying to remove. For most weed eaters, a .095-inch string is a good all-around choice. However, if you have a thicker weed eater or are trying to remove tough weeds, you may want to use a .105-inch string. Be sure to check the owner’s manual for your weed eater to find the recommended string size.

Here are some key takeaways:

• The type of string you use for your weed eater is important.
• The best string for a Black and Decker weed eater is typically .095-inch.
• Thicker weed eaters and tougher weeds may require a .105-inch string.
• Be sure to check the owner’s manual for your weed eater to find the recommended string size.