How To Put String In A Dewalt Weed Eater?

AvatarByKelsey Hammons General Blog

Step Instructions Image
1 Remove the spool cover from the weed eater.
2 Thread the new string through the hole in the spool.
3 Wind the string around the spool until it is full.
4 Replace the spool cover.

How To Put String In A Dewalt Weed Eater?

A Dewalt weed eater is a powerful tool that can be used to quickly and easily remove weeds from your yard. However, it’s important to know how to properly put string in the weed eater so that it can function properly. This guide will walk you through the process of putting string in a Dewalt weed eater, step-by-step.

Gather Your Materials

Before you begin, you will need to gather the following materials:

  • Dewalt weed eater
  • String trimmer line
  • Replacement spool (optional)
  • Pliers
  • Tape measure

Remove the Old String

The first step is to remove the old string from the weed eater. To do this, follow these steps:

1. Turn off the weed eater and disconnect the spark plug wire.
2. Locate the string spool on the weed eater.
3. Use the pliers to loosen the screws that hold the spool in place.
4. Remove the old spool and string.

Install the New String

Now that you have removed the old string, you can install the new string. To do this, follow these steps:

1. If you are using a replacement spool, install it on the weed eater.
2. Measure the length of string you need. The string should be long enough to reach from the spool to the tip of the weed eater head.
3. Cut the string to the desired length.
4. Thread the string through the hole in the spool.
5. Wind the string around the spool, starting at the center and working your way out.
6. Once you have wound the string around the spool, trim off any excess string.

Adjust the String Tension

Once you have installed the new string, you will need to adjust the string tension. To do this, follow these steps:

1. Locate the string tension adjustment screw on the weed eater.
2. Use the pliers to turn the screw clockwise to increase the string tension or counterclockwise to decrease the string tension.
3. Test the string tension by pulling on the string. The string should be tight enough so that it does not come off the spool when you are using the weed eater, but not so tight that it is difficult to turn the spool.

Now that you know how to put string in a Dewalt weed eater, you can enjoy all the benefits of this powerful tool. By following these steps, you can ensure that your weed eater is properly maintained and that it will continue to function properly for years to come.

Here are some additional tips for using a Dewalt weed eater:

  • Always wear safety glasses when using a weed eater.
  • Never operate the weed eater while barefoot.
  • Be aware of your surroundings and avoid operating the weed eater near people, animals, or objects that could be damaged.
  • Do not attempt to trim trees or other large plants with a weed eater.
  • Inspect the weed eater regularly for damage and replace any worn or damaged parts immediately.

How To Put String In A Dewalt Weed Eater?

Putting string on a Dewalt weed eater is a simple process that can be completed in a few minutes. Here are the steps involved:

1. Turn off the weed eater and disconnect the spark plug wire. This will prevent the weed eater from starting accidentally while you are working on it.
2. Remove the old string spool. To do this, unscrew the two screws that hold the spool in place. The screws are located on the side of the weed eater.
3. Install the new string. If you are using a replacement spool, thread the string through the spool according to the manufacturer’s instructions. If you are using the original spool, wind the string around the spool in a clockwise direction. Make sure that the string is tight and that there are no knots.
4. Reattach the string spool. Align the holes in the spool with the screws on the weed eater. Tighten the screws to secure the spool in place.
5. Turn on the weed eater and test the string. Make sure that the string is cutting through the weeds properly. If it is not, you may need to adjust the tension of the string.

Here are some additional tips for putting string on a Dewalt weed eater:

  • Use a new string spool whenever possible. This will help to ensure that the string is of the correct thickness and that it is properly wound.
  • Make sure that the string is tight when you reattach the spool. A loose string can cause the weed eater to vibrate excessively and may even damage the machine.
  • Test the string before you start using the weed eater. This will help to ensure that the string is cutting through the weeds properly.

By following these tips, you can easily put string on a Dewalt weed eater and keep your lawn looking its best.

Troubleshooting

If you are having trouble putting string on a Dewalt weed eater, there are a few things you can check:

  • Make sure that you are using the correct type of string. Dewalt weed eaters require a specific type of string that is made of nylon.
  • Make sure that the string is the correct thickness. The string should be about 0.065 inches thick.
  • Make sure that the string is tight when you reattach the spool. A loose string can cause the weed eater to vibrate excessively and may even damage the machine.
  • If you are still having trouble, you may need to take the weed eater to a qualified repair technician.

Putting string on a Dewalt weed eater is a simple process that can be completed in a few minutes. By following the steps in this guide, you can easily keep your lawn looking its best.

How to Put String in a Dewalt Weed Eater?

Q: What tools do I need?

A: You will need the following tools:

  • Dewalt weed eater
  • Replacement string
  • Pliers
  • Flathead screwdriver

Q: How do I remove the old string?

A: 1. Turn off the weed eater and disconnect the spark plug wire.
2. Locate the string head on the weed eater. It is usually a small, plastic cap located near the bottom of the trimmer.
3. Use the flathead screwdriver to pry open the string head.
4. Remove the old string from the string head.

Q: How do I put in the new string?

A: 1. Cut two pieces of replacement string to the same length. The length of the string will vary depending on the model of your weed eater.
2. Thread one end of each piece of string through the hole in the center of the string head.
3. Feed the strings through the slots in the string head.
4. Tie a knot at the end of each piece of string.
5. Trim the excess string so that it is flush with the string head.

Q: How do I adjust the string tension?

A: 1. Turn off the weed eater and disconnect the spark plug wire.
2. Locate the string tension adjustment screw on the weed eater. It is usually a small, Phillips head screw located near the string head.
3. Turn the screw clockwise to increase the string tension or counterclockwise to decrease the string tension.

Q: What if the string breaks while I’m using the weed eater?

A: If the string breaks while you’re using the weed eater, you can simply stop the weed eater and replace the string. Follow the steps above to remove the old string and put in the new string.

Q: How often do I need to replace the string?

The frequency with which you need to replace the string will depend on how often you use the weed eater and how thick the weeds are. As a general rule, you should replace the string every 20-30 minutes of use.

Q: What if I’m having trouble putting string in my Dewalt weed eater?

If you’re having trouble putting string in your Dewalt weed eater, you can try the following tips:

  • Make sure that you are using the correct type of string for your weed eater.
  • Make sure that the string is the correct length.
  • Make sure that the string is properly threaded through the string head.
  • Make sure that the string tension is properly adjusted.
  • If you’re still having trouble, you can contact Dewalt customer service for assistance.

Author Profile

Kelsey Hammons
Kelsey Hammons
I was born and raised in the fabulous state of Maryland but recently decided to pack up my stuff and move to the Midwest city they call Chicago.

I hope to capture all of my life’s adventures of living in the windy city. AKA the food I cook, my journey to the Chicago Marathon, the books I read and the trashy TV shows I watch. I’m a health-nut, book-worm and exercise fiend.

Join me, Kelsey, on this exciting journey as I embrace the challenges and joys of my new life in Chicago. From mastering the art of healthy cooking to hitting the pavement for marathon training, my blog is a window into my world of self-discovery and fun.

Similar Posts