How to Restring a Craftsman Electric Weed Eater | A Step-by-Step Guide

How to Restring a Craftsman Electric Weed Eater

Your Craftsman electric weed eater is a powerful tool for keeping your yard free of weeds. But when the string breaks, it can be a pain to replace. Fortunately, restringing a Craftsman electric weed eater is a simple process that only takes a few minutes.

In this article, we’ll walk you through the steps of restringing your Craftsman electric weed eater. We’ll provide step-by-step instructions, along with photos and videos to help you along the way.

So if your weed eater’s string has broken, don’t despair. By following the steps in this article, you’ll be back to trimming your weeds in no time.

Step	Instructions	Image
1	Turn off the weed eater and unplug it from the outlet.
2	Remove the spool cover by pressing down on the release button and pulling it off.
3	Unwind the old string from the spool.
4	Thread the new string through the eyelets on the spool.
5	Wind the new string onto the spool, making sure to keep it taut.
6	Replace the spool cover.
7	Test the weed eater to make sure it is working properly.

Tools and Materials Needed

To restring a Craftsman electric weed eater, you will need the following tools and materials:

• A Phillips head screwdriver
• A pair of pliers
• A new string trimmer line
• A work surface

Step-by-Step Instructions

1. Turn off the weed eater and unplug it from the power outlet.
2. Remove the string trimmer head from the weed eater.
3. Locate the string trimmer line spool. It is usually located on the top of the weed eater.
4. Remove the spool cap by unscrewing it with a Phillips head screwdriver.
5. Remove the old string trimmer line from the spool.
6. Thread the new string trimmer line through the eyelets in the weed eater head.
7. Wind the new string trimmer line around the spool in a clockwise direction.
8. Trim the excess string trimmer line with a pair of pliers.
9. Replace the spool cap.
10. Reattach the string trimmer head to the weed eater.
11. Turn on the weed eater and test it to make sure that it is working properly.

Restringing a Craftsman electric weed eater is a relatively simple task that can be completed in a few minutes. By following these step-by-step instructions, you can keep your weed eater in good working order and ensure that it is able to effectively remove weeds from your yard.

How To Restring Craftsman Electric Weed Eater?

Restringing a Craftsman electric weed eater is a relatively simple task that can be completed in a few minutes. However, it is important to follow the steps carefully to ensure that the weed eater is properly repaired and that you do not damage yourself or the tool.

Here are the steps on how to restring a Craftsman electric weed eater:

1. Turn off the weed eater and unplug it from the power outlet.
2. Remove the string spool cover by unscrewing the two screws that hold it in place.
3. Remove the old string from the spool.
4. Thread the new string through the eyelets on the weed eater head.
5. Wind the new string around the spool, making sure that it is evenly distributed.
6. Trim the ends of the string so that they are the same length.
7. Replace the string spool cover and tighten the screws.
8. Turn on the weed eater and test it to make sure that it is working properly.

Here are some tips for restringing a Craftsman electric weed eater:

• Make sure that the weed eater is turned off and unplugged before you begin.
• Use the correct type of string for your weed eater. The string should be the same diameter as the old string and should be made of a material that is compatible with your weed eater.
• Thread the new string through the eyelets carefully to avoid damaging the string or the weed eater head.
• Wind the new string around the spool evenly to avoid creating a knot.
• Trim the ends of the string so that they are the same length.
• Test the weed eater to make sure that it is working properly.

If you are having trouble restringing your Craftsman electric weed eater, you can contact the manufacturer for assistance. They may be able to provide you with instructions specific to your model of weed eater.

Troubleshooting Tips

If you are having trouble restringing your Craftsman electric weed eater, there are a few things you can check to troubleshoot the problem.

• Make sure that you are using the correct type of string for your weed eater. The string should be the same diameter as the old string and should be made of a material that is compatible with your weed eater.
• Make sure that you are threading the new string through the eyelets carefully. If the string is not threaded through the eyelets correctly, it can cause the weed eater to malfunction.
• Make sure that you are winding the new string around the spool evenly. If the string is not wound evenly, it can cause the weed eater to malfunction.
• Make sure that you are trimming the ends of the string so that they are the same length. If the ends of the string are not the same length, it can cause the weed eater to malfunction.

If you have checked all of these things and you are still having trouble restringing your Craftsman electric weed eater, you can contact the manufacturer for assistance. They may be able to provide you with instructions specific to your model of weed eater.

Additional Resources

Here are some additional resources that you may find helpful:

• Craftsman Electric Weed Eater Stringing Guide
• Craftsman Electric String Trimmer Stringing Instructions
• Craftsman Electric Weed Eater Stringing Instructions

We hope this information has been helpful. If you have any other questions, please do not hesitate to contact

How To Restring Craftsman Electric Weed Eater?

Q: What tools do I need to restring my Craftsman electric weed eater?

A: You will need the following tools:

• A Phillips head screwdriver
• A pair of pliers
• A new string trimmer line

Q: How do I remove the old string from my weed eater?

A: To remove the old string, follow these steps:

1. Turn off the weed eater and disconnect it from the power source.
2. Locate the string trimmer head. It is usually located at the end of the weed eater’s shaft.
3. Use the Phillips head screwdriver to remove the screws that hold the string trimmer head in place.
4. Remove the old string from the string trimmer head.

Q: How do I install the new string on my weed eater?

A: To install the new string, follow these steps:

1. Thread the new string through the holes in the string trimmer head.
2. Make sure that the string is the same length on both sides.
3. Pull the string tight and secure it in place with the screws.

Q: How do I adjust the string on my weed eater?

A: To adjust the string on your weed eater, follow these steps:

1. Turn on the weed eater and let it run for a few seconds.
2. Use the pliers to adjust the string trimmer head so that the string is about 1/8 inch off the ground.
3. Turn off the weed eater and disconnect it from the power source.

Q: What if my weed eater is still not working after I have restringed it?

A: If your weed eater is still not working after you have restringed it, there may be a problem with the motor. In this case, you will need to take your weed eater to a qualified repair technician.

In this blog post, we have discussed how to restring a Craftsman electric weed eater. We have provided step-by-step instructions on how to remove the old string, thread the new string, and install the new string. We have also provided some tips on how to keep your weed eater in good working order.

We hope that this blog post has been helpful. If you have any questions, please feel free to leave a comment below.