How To Start A Stihl Weed Eater Fs 38?

How to Start a Stihl Weed Eater FS 38

The Stihl FS 38 is a powerful and versatile weed eater that can be used for a variety of tasks around the yard. However, before you can use it, you need to know how to start it. This guide will walk you through the process of starting your Stihl Weed Eater FS 38, so you can get to work on those weeds in no time.

1. Prepare the Weed Eater

Before you can start your Weed Eater, you need to make sure that it is properly prepared. This includes:

• Checking the oil level. The oil level should be between the “full” and “add” marks on the dipstick. If the oil level is low, add oil until it reaches the “full” mark.
• Checking the air filter. The air filter should be clean and free of debris. If the air filter is dirty, clean it according to the manufacturer’s instructions.
• Checking the spark plug. The spark plug should be clean and free of corrosion. If the spark plug is dirty, clean it according to the manufacturer’s instructions.

2. Start the Weed Eater

Once the Weed Eater is prepared, you can start it by following these steps:

1. Turn the choke on. The choke is a lever located on the side of the Weed Eater. When the choke is on, it restricts the airflow to the carburetor, which helps to start the engine.
2. Pull the starter rope. The starter rope is located on the right side of the Weed Eater. Grasp the starter rope firmly and pull it slowly until you feel resistance. Then, pull the rope quickly and firmly until the engine starts.
3. Release the choke. Once the engine starts, release the choke. This will allow more airflow to the carburetor, which will help the engine to run smoothly.

4. Use the Weed Eater

Now that your Weed Eater is started, you can use it to trim your weeds. Here are a few tips for using your Weed Eater:

• Hold the Weed Eater with both hands. One hand should be on the handle and the other hand should be on the trigger.
• Keep the Weed Eater close to the ground. This will help you to avoid damaging your plants.
• Move the Weed Eater in a sweeping motion. This will help you to cover a wider area.
• Be careful not to touch the rotating line. The rotating line can be dangerous, so be careful not to touch it.

5. Stop the Weed Eater

To stop the Weed Eater, simply release the trigger. The engine will stop immediately.

Step	Instructions	Image
1	Make sure the Weed Eater is turned off and the spark plug wire is disconnected.
2	Pull the primer bulb 5-7 times to prime the engine.
3	Place the Weed Eater on the ground and hold it with your right hand.
4	Grasp the starter rope with your left hand and pull it slowly until you feel resistance.
5	Quickly pull the starter rope all the way out and release it.
6	The Weed Eater should start running. If it does not, repeat steps 4 and 5.

How To Start A Stihl Weed Eater Fs 38?

The Stihl FS 38 is a powerful and versatile weed eater that can be used for a variety of tasks around the yard. It’s easy to start and maintain, making it a great choice for homeowners and professionals alike.

This guide will show you how to start your Stihl FS 38 weed eater. We’ll cover everything from preparing the weed eater to starting the engine.

1. Preparing the Weed Eater

Before you start your Stihl FS 38 weed eater, there are a few things you need to do to prepare it.

• Remove the spark plug boot. This will prevent the spark from igniting the fuel and causing the engine to start.
• Check the fuel level. The fuel tank should be at least half full.
• Prime the engine. This will help to get the fuel flowing to the carburetor.

To prime the engine, follow these steps:

1. Turn the fuel valve to the “On” position.
2. Press the primer bulb several times until the fuel flows freely.
3. Turn the fuel valve back to the “Off” position.

2. Starting the Weed Eater

Now that the weed eater is prepared, you can start it by following these steps:

1. Turn the choke on. This will enrich the fuel mixture and make it easier to start the engine.
2. Pull the starter rope slowly until you feel resistance, then pull it quickly.
3. Hold the throttle trigger halfway down.

The engine should start and run smoothly. If it doesn’t start, try priming the engine again or checking the spark plug.

Troubleshooting

If your Stihl FS 38 weed eater is having trouble starting, there are a few things you can check to troubleshoot the problem.

• Check the spark plug. Make sure the spark plug is properly installed and that the gap is correct.
• Check the fuel filter. The fuel filter may be clogged, preventing fuel from flowing to the carburetor.
• Check the carburetor. The carburetor may be dirty or misadjusted, preventing the engine from running properly.

If you can’t find the problem yourself, take your weed eater to a qualified service technician for repairs.

Starting your Stihl FS 38 weed eater is easy if you follow these steps. By preparing the weed eater and following the instructions, you can get your weed eater started and running in no time.

Here are some additional tips for starting your Stihl FS 38 weed eater:

• Keep the air filter clean. A dirty air filter will restrict airflow to the carburetor, making it difficult to start the engine.
• Change the oil regularly. Old oil can become contaminated and cause problems with starting the engine.
• Inspect the spark plug regularly. A damaged or worn spark plug can prevent the engine from starting.

By following these tips, you can keep your Stihl FS 38 weed eater running smoothly and efficiently.

How to Start a Stihl Weed Eater FS 38

The Stihl Weed Eater FS 38 is a powerful and versatile tool that can be used for a variety of yard maintenance tasks. However, before you can use it, you need to know how to start it.

To start the Stihl Weed Eater FS 38, follow these steps:

1. Check the fuel level. The fuel tank should be at least half full.
2. Turn the choke on. The choke is a lever located on the side of the engine.
3. Pull the starter rope until the engine starts. The starter rope is located on the top of the engine.
4. Release the choke. Once the engine starts, you can release the choke.

The Stihl Weed Eater FS 38 is now ready to use.

Stopping the Weed Eater

To stop the Weed Eater, follow these steps:

1. Release the throttle trigger.
2. Turn the choke off.
3. Pull the starter rope until the engine stops.

The Weed Eater is now turned off.

Troubleshooting

If the engine won’t start, there are a few things you can check:

• Check the spark plug. Make sure the spark plug is properly installed and that the electrodes are clean.
• Check the fuel level. Make sure the fuel tank is at least half full.
• Clean the carburetor. If the carburetor is dirty, it can prevent the engine from starting.

If the engine is running rough, there are a few things you can check:

• Adjust the carburetor. The carburetor controls the amount of fuel and air that is mixed together to create the combustion that powers the engine. If the carburetor is not adjusted properly, the engine can run rough.
• Clean the air filter. A dirty air filter can restrict the amount of air that flows into the carburetor, which can cause the engine to run rough.
• Replace the spark plug. A worn-out spark plug can cause the engine to run rough.

If you are unable to troubleshoot the problem yourself, you can take the Weed Eater to a Stihl dealer for service.

The Stihl Weed Eater FS 38 is a powerful and versatile tool that can be used for a variety of yard maintenance tasks. By following these steps, you can easily start and stop the Weed Eater and troubleshoot any problems that may occur.

How do I start a Stihl Weed Eater FS 38?

1. Make sure the trimmer is turned off and the spark plug wire is disconnected.
2. Check the fuel level and add fuel if necessary.
3. Attach the spark plug wire.
4. Pull the starter rope slowly until you feel resistance.
5. Continue pulling the starter rope until the engine starts.

What if the trimmer won’t start?

There are a few possible reasons why the trimmer won’t start. Here are some troubleshooting tips:

• Check the fuel level. Make sure there is enough fuel in the tank.
• Check the spark plug. Make sure the spark plug is clean and properly gapped.
• Check the air filter. Make sure the air filter is clean.
• Check the carburetor. The carburetor may need to be cleaned or adjusted.

How do I adjust the carburetor on a Stihl Weed Eater FS 38?

The carburetor on a Stihl Weed Eater FS 38 can be adjusted to ensure that the engine is running properly. Here are the steps to adjust the carburetor:

1. Locate the carburetor on the engine.
2. Turn the idle screw clockwise to increase the idle speed or counterclockwise to decrease the idle speed.
3. Turn the high speed screw clockwise to increase the high speed or counterclockwise to decrease the high speed.
4. Test the engine to make sure it is running properly.

How do I change the spark plug on a Stihl Weed Eater FS 38?

The spark plug on a Stihl Weed Eater FS 38 should be changed every 50 hours of operation. Here are the steps to change the spark plug:

1. Turn off the trimmer and allow it to cool down.
2. Remove the spark plug boot by pulling it straight off the spark plug.
3. Use a spark plug wrench to unscrew the spark plug.
4. Install a new spark plug with the same size and heat range as the old spark plug.
5. Screw the spark plug in until it is snug.
6. Reconnect the spark plug boot.

How do I clean the air filter on a Stihl Weed Eater FS 38?

The air filter on a Stihl Weed Eater FS 38 should be cleaned every 25 hours of operation. Here are the steps to clean the air filter:

1. Turn off the trimmer and allow it to cool down.
2. Remove the air filter cover by unscrewing the two screws.
3. Remove the air filter from the cover.
4. Wash the air filter in warm, soapy water.
5. Rinse the air filter thoroughly with clean water.
6. Dry the air filter completely before reinstalling it.

How do I maintain a Stihl Weed Eater FS 38?

To keep your Stihl Weed Eater FS 38 in good working order, it is important to maintain it regularly. Here are some tips for maintaining your trimmer:

• Change the oil every 25 hours of operation.
• Change the spark plug every 50 hours of operation.
• Clean the air filter every 25 hours of operation.
• Sharpen the blades every 100 hours of operation.
• Inspect the trimmer for any damage and repair as needed.

  starting a Stihl Weed Eater FS 38 is a simple process that can be completed in a few steps. By following the instructions in this guide, you can have your weed eater up and running in no time.

Here are the key takeaways from this guide:

• Make sure the choke is in the closed position.
• Press the primer bulb three times.
• Pull the starter rope until the engine starts.
• Release the choke and continue to pull the starter rope until the engine runs smoothly.

If you have any trouble starting your weed eater, consult your owner’s manual or a qualified technician.