How To Change Husqvarna Weed Eater Head?

How to Change a Husqvarna Weed Eater Head

Your Husqvarna weed eater is a powerful tool that can help you keep your yard looking its best. But, like any other tool, it needs to be maintained in order to work properly. One of the most important maintenance tasks is changing the weed eater head.

Changing the weed eater head is a relatively simple task that can be completed in a few minutes. However, it’s important to do it correctly so that you don’t damage your tool.

In this article, we’ll walk you through the process of changing a Husqvarna weed eater head. We’ll provide step-by-step instructions, as well as tips and tricks to help you get the job done quickly and easily.

So, if you’re ready to learn how to change a Husqvarna weed eater head, read on!

Step Instructions Image
1 Turn off the weed eater and disconnect the spark plug wire.
2 Loosen the screws that hold the old head in place.
3 Remove the old head.
4 Install the new head.
5 Tighten the screws.
6 Reconnect the spark plug wire.

How To Change Husqvarna Weed Eater Head?

Tools and Materials Needed

  • Husqvarna weed eater
  • Replacement weed eater head
  • Pliers
  • Screwdriver
  • Penetrating oil

Step-by-Step Instructions

1. Turn off the weed eater and disconnect the spark plug wire.
2. Remove the old weed eater head by unscrewing the two screws that hold it in place.
3. Apply a few drops of penetrating oil to the threads of the new weed eater head.
4. Screw the new weed eater head onto the weed eater until it is snug.
5. Reattach the spark plug wire.
6. Test the weed eater to make sure that it is working properly.

Tips for Changing a Husqvarna Weed Eater Head

  • Make sure that the weed eater is turned off and the spark plug wire is disconnected before you begin work.
  • Use the correct size pliers to unscrew the screws that hold the old weed eater head in place.
  • Apply a few drops of penetrating oil to the threads of the new weed eater head to make it easier to screw on.
  • Tighten the new weed eater head until it is snug, but do not overtighten it.
  • Test the weed eater to make sure that it is working properly.

Troubleshooting

If the weed eater is not working properly after you have changed the head, there may be a few things that you can check.

  • Make sure that the weed eater is turned on and the spark plug wire is connected.
  • Check the air filter to make sure that it is clean.
  • Check the fuel line to make sure that it is clear of debris.
  • Check the spark plug to make sure that it is in good condition.

If you have checked all of these things and the weed eater is still not working properly, you may need to take it to a qualified repair shop.

Changing the head on a Husqvarna weed eater is a relatively simple task that can be completed in a few minutes. By following the steps in this guide, you can safely and easily change the head on your weed eater and keep it running smoothly.

How to Change Husqvarna Weed Eater Head

Changing the head on your Husqvarna weed eater is a relatively simple task that can be completed in just a few minutes. Here’s a step-by-step guide:

1. Turn off the weed eater and disconnect the spark plug wire. This will prevent the engine from starting accidentally while you’re working on it.
2. Locate the head lock lever. This is a small lever located on the side of the weed eater.
3. Press down on the head lock lever and turn the head counterclockwise until it comes loose.
4. Remove the old head from the weed eater.
5. Install the new head onto the weed eater. Make sure that the head is properly seated in the groove on the shaft.
6. Turn the head clockwise until it’s snugly in place.
7. Release the head lock lever.
8. Reconnect the spark plug wire.
9. Test the weed eater to make sure that it’s working properly.

Troubleshooting

If you’re having trouble changing the head on your Husqvarna weed eater, here are a few troubleshooting tips:

  • Make sure that you’re turning the head in the correct direction. The head should be turned counterclockwise to remove it and clockwise to install it.
  • If the head is stuck, you can try using a lubricant to help loosen it.
  • If the head is still stuck, you may need to take the weed eater to a qualified service center for repairs.

Additional Tips

Here are a few additional tips for changing the head on your Husqvarna weed eater:

  • Wear gloves to protect your hands from the sharp blades.
  • Keep the area around the weed eater clean and free of debris.
  • Be careful not to drop the head or the screws.
  • If you’re not comfortable changing the head yourself, you can take the weed eater to a qualified service center for repairs.

Changing the head on your Husqvarna weed eater is a relatively simple task that can be completed in just a few minutes. By following the steps in this guide, you can easily keep your weed eater in good working order.

How To Change Husqvarna Weed Eater Head?

Q: What tools do I need to change the head on my Husqvarna weed eater?

A: You will need the following tools:

  • A Phillips head screwdriver
  • A pair of pliers
  • A new weed eater head

Q: How do I remove the old head?

A: 1. Turn off the weed eater and disconnect the spark plug wire.
2. Locate the two screws that hold the old head in place.
3. Use the Phillips head screwdriver to loosen the screws.
4. Use the pliers to hold the head while you unscrew the screws.
5. Once the screws are removed, the head can be pulled off of the shaft.

Q: How do I install the new head?

A: 1. Align the new head with the shaft.
2. Insert the screws through the holes in the head and into the shaft.
3. Use the Phillips head screwdriver to tighten the screws.
4. Make sure the head is securely attached to the shaft before you start using the weed eater.

Q: What should I do if the head is stuck?

A: If the head is stuck, you can try the following:

  • Spray some WD-40 or other penetrating oil on the threads of the screws.
  • Use a rubber mallet to tap on the head while you try to unscrew it.
  • If the head is still stuck, you may need to take the weed eater to a service center.

Q: How often should I change the head on my weed eater?

A: The frequency with which you need to change the head will depend on how often you use the weed eater and how thick the weeds are. As a general rule, you should change the head every 20-25 hours of use.

Q: What are the signs that I need to change the head?

A: There are a few signs that you may need to change the head on your weed eater, including:

  • The head is not cutting through the weeds as well as it used to.
  • The head is starting to come loose from the shaft.
  • The head is visibly worn or damaged.

If you notice any of these signs, it is time to change the head on your weed eater.

In this blog post, we have discussed how to change the head on a Husqvarna weed eater. We have covered the steps involved in the process, as well as some tips and tricks to make it easier. We hope that this information has been helpful, and that you are now able to change the head on your Husqvarna weed eater with ease.

Here are some key takeaways from this blog post:

  • The first step is to turn off the weed eater and disconnect the spark plug wire.
  • Next, remove the old head by unscrewing the bolts that hold it in place.
  • Align the new head with the mower deck and install it by screwing the bolts back in place.
  • Finally, reconnect the spark plug wire and start the weed eater to make sure that it is working properly.

Author Profile

Kelsey Hammons
Kelsey Hammons
I was born and raised in the fabulous state of Maryland but recently decided to pack up my stuff and move to the Midwest city they call Chicago.

I hope to capture all of my life’s adventures of living in the windy city. AKA the food I cook, my journey to the Chicago Marathon, the books I read and the trashy TV shows I watch. I’m a health-nut, book-worm and exercise fiend.

Join me, Kelsey, on this exciting journey as I embrace the challenges and joys of my new life in Chicago. From mastering the art of healthy cooking to hitting the pavement for marathon training, my blog is a window into my world of self-discovery and fun.

Similar Posts